From robert.hamon at gmail.com  Wed Jun  2 10:50:11 2010
From: robert.hamon at gmail.com (Robert Hamon)
Date: Wed, 2 Jun 2010 13:50:11 -0400
Subject: [Caos] Infiniband and GlusterFS
In-Reply-To: <AANLkTim-yuA1TlOke_XEJPtxGOJP7u4SoO11KK33_cGR@mail.gmail.com>
References: <AANLkTim-yuA1TlOke_XEJPtxGOJP7u4SoO11KK33_cGR@mail.gmail.com>
Message-ID: <AANLkTikQnAlLynzB8-fZuwEhIKpFjHJc_SA9LkQfzFC2@mail.gmail.com>

I've deployed CAOS-NSA 1.0.29 on a Sun Blade 6000 Cluster consisting
of 20 compute nodes with Infiniband adapters in them.
What do I need to change in CAOS config to enable MPI and GlusterFS over the
Infiniband fabric?
And speaking of Gluster, I see the GlusterFSv2 package in "smart" but
what's the proper way to install this on the compute nodes? I though
it would be installed by default. And what about GlusterFSv3 which is out
and seems easier to use.

Thanks.

Robert.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.infiscale.org/pipermail/caos/attachments/20100602/6a40b04a/attachment.html